Wiring is easier to deal with when somebody explains it plainly, and that is exactly how Oro Valley Electrical Company approaches every job. We handle the full range of electrical work for homes and businesses across Oro Valley and Pima County: repairs and troubleshooting, breaker panel upgrades, wiring and circuit installation, lighting, dedicated appliance circuits, EV charger hookups, and more. Plain answers. Clear options. Safe wiring.
Call (520) 462-6595 for a quote.
We offer electrical service scheduled without the runaround, every day from 6:00 AM to 9:30 PM.
When something stops working, the first job is figuring out why. A dead outlet, flickering lights, a breaker that keeps tripping, or half the house losing power all point to something specific in the wiring or the panel. We start with diagnosis. The fault is traced before anything is replaced, which keeps the repair focused and the cost tied to what actually needs doing.
A troubleshooting visit covers the symptom you called about and a look at the surrounding circuit. Outlets not working often trace back to a tripped GFCI upstream, a loose connection, or a wiring fault at the box. Flickering lights can signal a failing fixture, a loose neutral, or a circuit that is carrying more load than it should. A tripping breaker may mean an overloaded circuit, a short, or a breaker that has worn out and needs replacement.
We also handle hardwired smoke detector and carbon monoxide detector installation and replacement. If your detectors are aging out or you are adding coverage to a new part of the home, we wire them in properly so the whole system communicates the way it should. We'll make your wiring safe again.
Whether this is your first repair or your tenth, a panel that cannot carry the load is a problem that compounds over time. Older panels were sized for a different era of electrical demand. Modern homes run air conditioning continuously through a long Arizona summer, charge vehicles, and carry more circuits than the original service was built to support.
We handle residential and commercial panel work: full panel replacement, 200 amp service upgrades, subpanel installation, and load calculations to confirm the new service matches what the home or building actually needs. That includes grounding and bonding, AFCI and GFCI breaker installation, and the documentation that goes with panel and wiring work finished to code.
For Oro Valley homes going through a kitchen remodel, a bathroom addition, or a garage conversion, a panel upgrade is often part of the job. The same applies to commercial properties adding equipment or expanding a tenant space. We scope the work on the call so you know what is involved before anything is scheduled.
Every room in a home or commercial space depends on wiring that was put in correctly and connections that have stayed tight. We install and replace outlets of all types: standard, GFCI, AFCI, and USB-equipped. Switch work includes basic replacements, dimmer installation, and multi-location switching for larger rooms or stairwells.
Dedicated circuits matter when a single appliance needs its own path to the panel. A dryer, a range, a hot tub, or the supply circuit for an air conditioning unit each draws enough current that sharing a circuit with other loads creates problems. We run the circuit, size the breaker, and confirm the panel has the capacity to handle it cleanly.
Older homes in the area sometimes still have knob-and-tube wiring or aluminum branch circuit wiring. Both can be addressed. Knob-and-tube replacement and aluminum wiring remediation are jobs we handle during remodels or as standalone projects when an inspection flags the issue. We also wire garages, sheds, home additions, and new construction from the ground up. Give us a call and consider it handled.
When the job is done, we leave your home clean and powered, and that applies to lighting work as much as any other trade. Recessed lighting, LED fixture installation, under-cabinet lighting, and light fixture replacement are all straightforward jobs when the wiring is handled properly. We plan the circuit load, confirm the switch location works for the room, and finish the installation cleanly.
Ceiling fan installation involves more than swapping a fixture. The junction box has to be rated for a fan's weight and movement, the wiring has to support the separate fan and light controls, and the circuit needs to be the right size for the load. We handle all of it.
Outdoors, we wire landscape lighting, security lighting, motion sensor fixtures, and exterior outlets. Pool and spa wiring, outdoor misting-system circuits, and RV hookups are part of the work we do in this area. Commercial lighting installation for offices, retail spaces, and common areas in multi-tenant properties rounds out the scope. We keep you informed from diagnosis to final test, so there are no open questions when we leave. We make the fix and leave it tidy.
Oro Valley's desert climate shapes what electrical work comes up most often. A long, intense summer puts sustained load on every cooling circuit in the house. Solar adoption across the Tucson metro is among the highest in the country. EV ownership is growing steadily. The three services below reflect what we see most in this area and what the local housing stock actually needs.
An older panel that was sized for a simpler electrical load runs out of capacity when solar, battery storage, and high-demand cooling circuits are added. We assess the existing service, calculate the load the new configuration requires, and replace or expand the panel to match. That includes subpanel additions where the main panel is already at capacity and a second distribution point makes more sense than a full replacement.
We handle the electrical side of solar and battery storage systems: the dedicated circuits, the subpanel work, and any service upgrade the system requires to connect cleanly to the home's existing wiring. Oro Valley's sun exposure makes solar a practical choice for a large share of homes here, and the wiring infrastructure behind the system determines how well it performs and how safely it integrates. Whole-home surge protection is worth pairing with any solar-connected system to protect the inverter and the home's other circuits from voltage spikes.
A Level 2 EV charger runs on a 240-volt dedicated circuit and needs a panel with enough available capacity to support it. The visit starts with a panel assessment, then moves to running the circuit to the garage or driveway location and installing the outlet or hardwired charger. As EV adoption continues to grow across Oro Valley and the broader Pima County area, more homeowners are adding charging at home rather than relying on public stations. We scope the job on the call and confirm what the panel can support before we schedule.
Wiring a home right takes the right tools and a careful hand, and that is especially true for the systems that protect everything else. Whole-home surge protection is installed at the panel and guards against voltage spikes that can damage appliances, electronics, and wiring throughout the house. Monsoon season in Pima County brings the kind of electrical activity that makes panel-level protection worth having.
Backup generator hookup and transfer switch installation let a home or business switch to generator power safely when the grid goes down. A transfer switch keeps the generator isolated from the utility line, which matters for safety and for the integrity of the home's wiring. We install the transfer switch, wire the connection to the panel, and confirm the system operates correctly before we leave.
Electrical safety inspections are useful before a home purchase, after a major remodel, or when an older property has not had its wiring reviewed in a long time. The inspection covers the panel, the branch circuits, the outlets, the grounding, and any visible wiring concerns. We trace the fault. We fix the wiring. We restore the power.
Property managers, landlords, and small business owners need electrical work handled on a schedule that fits how a business actually operates. We are available every day from 6:00 AM to 9:30 PM, which means a call placed early in the morning or later in the evening still reaches someone who can scope the job and get it on the schedule.
Commercial work we handle includes electrical repair and troubleshooting for office and retail spaces, commercial panel upgrades, dedicated circuits for commercial equipment, and lighting installation for tenant spaces and common areas. This is a local operation, and every customer matters. Whether the job is a single outlet in a break room or a full panel replacement for a growing business, we approach it the same way. We'll make your wiring safe again.
Whether this is your first repair or your tenth, questions about cost are reasonable and we answer them directly. When you call, you get the rate on the phone. The scope is settled before anything is scheduled, so you know what the job involves and what it costs before we show up.
Common cost questions we hear involve panel upgrades, whole-home rewiring, EV charger installation, ceiling fan installation, outlet installation, recessed lighting, transfer switch installation, and electrical inspection pricing. Each job is different, and the price depends on what the work actually requires. We keep you informed from diagnosis to final test, so there are no gaps between what was quoted and what was done.
We serve Oro Valley and the communities around it, including Tucson, Marana, Catalina, Casas Adobes, Flowing Wells, Sahuarita, and Saddlebrooke. If your property is in the Oro Valley area or anywhere in the broader Pima County region, call us and we will confirm coverage when you schedule.
We are available every day from 6:00 AM to 9:30 PM.
Call (520) 462-6595 and describe what you are dealing with.
We scope the job on the call, confirm the price, and get the visit on the schedule before we hang up. You do not need to have a diagnosis ready, just a description of the symptom.
Yes. We are available every day of the week, including Saturday and Sunday, from 6:00 AM to 9:30 PM. Weekend calls are scheduled the same way as weekday calls, and you get a price on the phone before anything is booked.
When you call, we go through the scope of the job and confirm the rate before anything is booked. The price is tied to what the work actually involves, and you are told what it covers before we schedule. Ask what the rate includes and you get a straight answer.
If the scope changes once we are on site, we explain why before any additional work begins. No work beyond the original scope starts without your sign-off. The goal is that what was discussed on the call matches what happens at the visit.
Yes. We work with office buildings, retail spaces, restaurants, warehouses, and multi-unit residential properties throughout the Oro Valley and Pima County area. Commercial panel upgrades, dedicated circuits, lighting installation, and repair work are all part of what we schedule.
Yes. Property managers and landlords call us regularly for repair requests, failed-inspection follow-up, and electrical safety inspections across multiple units. We scope each job on the call and work around the access and scheduling constraints that come with managed properties.
A description of the symptom is enough to get started. If you know which room or circuit is affected, which breaker is tripping, or what changed before the problem appeared, that information helps us scope the job faster. You do not need to know the cause before you call.
The price depends on what the work actually requires, not on square footage alone. A panel upgrade is scoped based on the existing service, the load calculation, and what the new configuration needs to carry. We work through that on the call so the quote reflects the real job.
Clear access to the main panel and the work area before we arrive. If the job involves outlets or fixtures in a specific room, move furniture or stored items away from the wall so we can reach the work area without delay. We will confirm any specific preparation needed when we schedule.
Built for homeowners. Ready for property managers. Ready for your panel.
Oro Valley Electrical Company takes calls every day from 6:00 AM to 9:30 PM.
Call (520) 462-6595 for a quote on any electrical repair, installation, or upgrade.
Tell us what you are dealing with, and we will walk through the scope and the rate with you on the call.
We handle the full range of electrical work across Oro Valley and the surrounding Pima County area, from a single tripped breaker to a complete service upgrade. The table below lays out what each service covers, who it fits best, and a practical note to help you decide what to schedule.
Call (520) 462-6595 to get a price before anything is booked. We are open every day from 6:00 AM to 9:30 PM.
| Service Type | What the Job Involves | Ideal For | Things to Know |
|---|---|---|---|
| Outdoor & Misting-System Circuits | Outdoor kitchen circuit runs, Misting system electrical hookup, Weatherproofed outlet installation, Dedicated circuits for outdoor equipment | Homeowners expanding outdoor living spaces in the desert climate | Outdoor circuits in Pima County need to handle heat, UV exposure, and monsoon moisture. We weatherproof connections and size circuits for the conditions here. |
| Ceiling Fan Installation | New fan installation and replacement, Wiring from scratch where no box exists, Fan-rated box installation, Multi-speed and remote wiring | Rooms without existing fan wiring, especially in homes built before ceiling fans were standard | In a region where summer temperatures push well past 100 degrees, a ceiling fan on the right circuit makes a measurable difference in comfort. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp upgrades, Subpanel installation, Load calculations for new demand, Meter and service-entrance work | Homes adding solar, an EV charger, or high-demand appliances | In Oro Valley, long cooling seasons and growing solar adoption push older panels past their rated capacity. A service upgrade sets the foundation for everything that follows. |
| Electrical Safety Inspections | Panel and wiring condition review, GFCI and AFCI protection check, Grounding and bonding assessment, Pre-sale and rental compliance checks | Home buyers, sellers, landlords, and owners of properties with older wiring | We report what we find before recommending any work, so you have a clear picture of the system before deciding on next steps. |
| RV Hookups | 30-amp and 50-amp RV outlet installation, Dedicated circuit from the panel, Outdoor weatherproofed connections, Panel capacity check before install | Homeowners who park an RV at home and want a proper dedicated hookup | A proper RV hookup protects both the vehicle and the home's wiring. We confirm the panel can carry the added load before running the circuit. |
| Wiring & Circuit Installation | New circuit runs, Knob-and-tube and aluminum wiring remediation, Full and partial rewiring, Grounding and bonding corrections | Older homes with outdated wiring or properties adding significant new load | Old wiring that was adequate at installation can become a concern as loads increase. We assess what the situation actually requires before recommending a full rewire. |
| Outlet & Switch Installation | Standard, GFCI, and AFCI outlets, Dimmer and multi-location switches, USB outlet installation, Outlet and switch replacement | Kitchens, bathrooms, garages, and outdoor areas needing updated protection | GFCI outlets are required by code in kitchens, bathrooms, and outdoor locations. Older homes in the area often lack them. |
| Pool & Spa Wiring | Pool pump and equipment circuits, Spa and hot tub wiring, Bonding and GFCI protection, Outdoor weatherproofed connections | Homeowners with existing or new pool and spa equipment needing proper electrical hookup | Pool and spa wiring requires specific bonding and GFCI protection under code. We confirm the installation meets current requirements before wrapping up. |
| Whole-Home Surge Protection | Panel-mounted surge device installation, Protection for all connected circuits, Lightning and utility-spike defense, Single installation covering the whole home | Homes in areas with monsoon lightning activity or sensitive electronics | Monsoon season in the Sonoran Desert brings lightning that can travel through the service entrance and damage wiring throughout the house. A panel-mounted device intercepts that voltage before it reaches your circuits. |
| Breaker & Fuse Repair | Breakers that trip or fail to reset, Fuse box assessment and repair, Panel component replacement, Load testing on problem circuits | Homes with recurring breaker issues or an aging fuse box | A breaker that trips repeatedly under normal loads is often a sign the circuit is undersized or the panel needs attention. |
| Dedicated Appliance Circuits | Refrigerator, dryer, and washer circuits, Dishwasher and microwave circuits, Workshop and garage circuits, Circuit sizing to protect the appliance | Homeowners adding a major appliance or experiencing tripped breakers on shared circuits | A dedicated circuit keeps a high-draw appliance from overloading the rest of the home's wiring and protects the appliance itself. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Burning smells or buzzing sounds, Circuit tracing and fault diagnosis | Any home or property with an unexplained electrical symptom | The fault is traced before anything is replaced, so the repair stays focused on what actually needs doing. |
| Lighting Installation | Recessed and retrofit lighting, Under-cabinet and LED fixtures, Exterior and security lighting, Motion-sensor and landscape circuits | Homeowners upgrading interior lighting or adding outdoor security fixtures | Exterior lighting in the desert climate needs weatherproofed connections and properly sized circuits to handle the heat. |
| Solar & Battery Installation | Solar tie-in circuits, Battery backup hookup, Subpanel work for solar systems, Panel capacity confirmation and upgrade | Homeowners installing or expanding a solar or battery storage system | We handle the electrical connection, not the solar equipment itself. If the panel needs upgrading to accept the tie-in, we scope that on the same call. |
| EV Charger Installation | Level 2 charger circuit installation, Panel capacity check, Garage and driveway circuit runs, Panel upgrade coordination if needed | EV owners who want reliable overnight charging at home | A Level 2 charger requires a dedicated 240-volt circuit. We confirm panel capacity before scheduling. |
Call (520) 462-6595 and we will scope the job, give you a price, and get it on the schedule. We are open every day from 6:00 AM to 9:30 PM.
(520) 462-6595